Install awning accessories, these details should not be overlooked
When installing awning accessories, some details often determine the quality of the installation and the effect of the awning in the future. Ignoring these details may result in the awning not being able to be used normally, and even a safety hazard. Here is a detailed introduction to the points that cannot be ignored during the installation process.
Preparation before installation
Check the list of accessories: After receiving the awning accessories, be sure to check the number and type of accessories carefully against the product manual. If the key parts are missing, the installation may not proceed smoothly.
Check the quality of the parts: Check the parts one by one for damage, deformation, etc. For example, check whether the aluminum alloy frame is scratched and bent, and whether the shade cloth is damaged and chromatic aberration. If you find any problems, contact the supplier to replace them.
Prepare installation tools: Common installation tools include an electric drill, screwdriver, wrench, and level. Ensure that all tools are available and can be used properly. Otherwise, tools may interrupt the installation.
https://www.alltopusa.com/products/b0c58l76lv
Key points from the installation process
Choose the right installation location: Determine the installation location of the awning according to the needs of use and the structure of the building. In general, it should be installed on a flat, solid wall or roof, and avoid installation in a cracked, loose part. If there are cracks in the wall or the wall material is not strong enough, then you need to fill with cement or install additional ground support rods.Make sure the installation is level: Use a level if you can. Make sure the awning is level. Use a level and tape measure and mark each installation hole.
Install the awning cloth: Install the awning cloth correctly on the frame, paying attention to the tension of the awning cloth. Too loose will cause the shade cloth to sway in the wind and be easily damaged; Too tight may make the sunshade cloth uneven force, tear. Special strips or ropes can be used to fix the shade cloth to the frame during installation. Of course, if it is a retractable awning, you do not need to worry about these.
Inspection after installation
Overall inspection: After the installation is completed, check whether the overall appearance of the awning is smooth and beautiful, and whether the frame and the awning cloth are tightly connected.
Functional test: Operate the opening and closing function of the awning, check whether the motor is running normally, and whether the awning is unrolled and put away smoothly. If there are stalls, abnormal sound, etc., check the fault in time.
Safety check: Shake the awning vigorously to check its stability. Ensure that the awning will not loosen and fall off in bad weather such as strong winds to ensure safe use.
Installation of awning accessories need to pay attention to details, from the preparation before installation to the main points of the installation process control, and then to the inspection after installation, most of the details can not be too casual, think about it, awning needs to face high temperature wind, rain and snow weather, need a certain strength bearing and compressive ability, if the installation is not good, the service life will not be very long. The installation of awning this kind of thing counts as half a construction project, we all know that the construction of this kind of thing from the purchase of materials to the final installation is quite a troublesome thing, so we hope customers by focusing on the awning installation details to achieve one step in place once and for all.
